Review of the development of China's plastic produ

2005 review of the development of China's plastic products industry

this year, the domestic market demand for plastic products is about 25million tons, and the rapid growth of demand is still packaging plastic products, agricultural plastic products and building plastic products

since this year, the output of plastic products has continued to maintain a good growth trend. In January, the output of plastic products (Enterprises above Designated Size) reached 1456500 tons, an increase of 24.3% year-on-year. In May, the output exceeded 1.8 million tons to 1.8279 million tons for the first time, with a year-on-year increase of 14.8%, breaking the historical record of monthly output. From January to may, the cumulative output reached 7.9856 million tons, with a year-on-year increase of 12 2％。 It is estimated that the annual output of this year may reach more than 20million tons

in recent years, due to the domestic market's demand for packaging materials and building plastic products, a part of the waste demand has increased rapidly. The output of plastic films, plastic packaging boxes and containers, plastic woven bags, plastic pipes (rods) and plastic profiles (including plates and sheets) has increased rapidly. Last year, the output of plastic pipes (rods) increased significantly, reaching 1.97 million tons, an increase of 18.7% over the previous year. The output of plastic film increased to 3.6589 million tons, an increase of 12.6% over the previous year. The output of plastic woven bags exceeded 2million tons last year, reaching 2024100 tons, an increase of 11.1% over the previous year. The output of plastic profiles (including plates and sheets) reached 1688100 tons, an increase of 10.6% over the previous year. The output of plastic packaging boxes and containers was 855300 tons, an increase of 8.4% over the previous year. The output of plastic artificial leather reached 659700 tons, an increase of 27.1% over the previous year. The output of plastic synthetic leather increased to 346000 tons, an increase of 16.5% over the previous year. The output of daily plastic products reached 2247700 tons, an increase of 13.2% over the previous year

product structure of plastic products in China

among all kinds of plastic products currently produced in China, the major categories with an output of more than 1million tons are: plastic film (including agricultural film), daily-use plastic products, plastic woven products, plastic pipes (rods) and plastic profiles (including plates and sheets). In 2004, the output of plastic film increased to 3.6589 million tons, accounting for about 19.8% of the total output of plastic products, ranking first in all types; The daily output of plastic products reached 2247700 tons, accounting for about 12.2% of the total output of plastic products; The output of plastic woven bags reached 2024100 tons, accounting for about 11% of the total output of plastic products; Plastic tubes (rods) the national health and Family Planning Commission and the food and Drug Administration jointly issued 53 national standards for food safety, including the national standard for food safety, general safety requirements for food contact materials and products (GB 4806.1 (2) 016) and the national standard for food safety, national standard for the use of additives for food contact materials and products (GB 9685 (2) 016), with the output of 1.97 million tons, accounting for about 10.7% of the total output of plastic products; The output of plastic profiles (including plates and sheets) is 1688100 tons, accounting for about 9.1% of the total output of plastic products; The output of foamed plastic products is 859600 tons, accounting for about 4.7% of the total output of plastic products; The output of plastic packaging boxes and containers is 855300 tons, accounting for about 4.6% of the total output of plastic products; The output of plastic artificial leather is 659700 tons, accounting for about 3.6% of the total output of plastic products; The output of plastic synthetic leather is 346000 tons, accounting for about 1.9% of the total output of plastic products; The output of other plastic products is 4.1567 million tons, accounting for about 22.5% of the total output of plastic products

domestic market demand continues to grow

in recent years, the raw material structure of polyethylene products has undergone some changes. Linear low-density polyethylene products have been more widely used, replacing some low-density polyethylene products. In the next few years, with the further improvement of linear low-density polyethylene production technology, its processing performance and use performance will be further improved, and the price will be low, the application field will be broader, and it will replace low-density polyethylene products more widely. Therefore, the growth rate of China's demand for low-density polyethylene products will slow down, and the consumption of linear low-density polyethylene products will gradually exceed that of low-density polyethylene products

polypropylene has replaced engineering plastics in some application fields because of its excellent impact strength and environmental stress resistance, which has increased its consumption proportion in the field of injection molded products. At the same time, the development of geotechnical materials makes the application of polypropylene in the fiber field obtain new market opportunities. Polypropylene used in film products is also growing rapidly due to the rapid development of the packaging industry. In the application field of woven products, the consumption proportion of polypropylene will be significantly reduced

the demand for PVC products for construction will increase rapidly. With the development of national economy, the chemical building materials industry will develop rapidly. The demand for plastic pipes and plastic doors and windows will increase significantly. At present, some major cities in China have expressly stipulated that PVC drainage pipes and rainwater pipes must be used in reconstruction and expansion projects, and encouraged the use of plastic doors and windows, which will continue to promote the growth of demand for PVC rigid products. Among PVC soft products, except for plastic shoes and leather products, the growth rate of film and cable will slow down, especially film products, which will be largely replaced by polyethylene film

the consumption structure of polystyrene products in China will not change much in the next few years, and will still be dominated by household appliance parts produced by injection molding, while the use of electronic appliances, daily necessities and office supplies will grow rapidly. Due to the "white pollution" of polystyrene fast food lunch boxes and other foaming materials, the consumption of polystyrene foam products in this area will gradually shrink, but the consumption in construction will increase. Generally speaking, the demand for polystyrene products increased slowly

at present, ABS resin is mainly used in the production of large household appliance components in China. Due to the slow growth of the output of televisions, refrigerators and washing machines in recent years, the growth of ABS demand in this area will slow down. With the rapid popularization of the concepts of household life comfort, kitchen electrification and health in recent years, the consumption proportion of ABS small household appliances will rise. In addition, the rapid development of automobile manufacturing industry and motorcycle manufacturing industry will become the main driving force for the demand growth of ABS resin products

affected by the sharp rise in international oil prices last year, the price of plastic raw materials at home and abroad has remained at a high level, resulting in a sharp decline in the economic benefits of China's plastic products industry, and the profit margin has been squeezed. Under this severe situation, China's plastic products industry has actively adjusted its product structure and industrial structure, increased scientific and technological investment and technological innovation, and worked hard to improve its comprehensive competitiveness, and achieved gratifying results. It is believed that China's plastic products industry will achieve stable development this year

source: China investment consulting